Roofs Stripped to the Deck First
Roof replacement in Smithfield for single-layer installations over original decking that needs inspection
When a single layer of shingles sits over original decking, hidden rot or soft spots can remain undetected until the old roof is stripped completely, exposing the wood beneath. Siding Master replaces roofs in Smithfield and across Cache County, beginning every job by stripping the existing shingles and underlayment down to the deck so the decking can be inspected before new roofing is installed. Many older wood-framed homes here have original decking that has been overlaid once before, and adding another layer without checking the substrate means hidden damage gets sealed under new shingles, shortening the lifespan of the roof.
The crew removes the old shingles and underlayment completely, inspects the decking for soft spots, rot, or delamination, and replaces damaged sections before new underlayment and roofing are laid. The family-run crew gives you a number within the same week of the site visit, after first discussing your budget and what the scope includes.
Arrange an on-site consultation to review your current roof condition and decking.

What Changes After the Roof Is Replaced
Stripping to the deck means every piece of old roofing material comes off, the wood is checked board by board, and any section that shows rot or weakness is cut out and replaced with new decking before the underlayment is rolled out. This approach catches damage that would otherwise remain hidden under a second layer, preventing future leaks or structural issues.
Once the roof is finished, you'll notice that shingles lie flat without bubbling or unevenness, valleys channel water cleanly without pooling, and the roof meets walls and chimneys with new flashing that seals every transition. The decking beneath the new roof is solid and dry, so the roof performs as intended for its full rated lifespan.
Roof replacement also includes replacing drip edge, starter strips, and ridge vents where needed, so the entire system works together rather than mixing old components with new roofing. The crew coordinates those details during the tear-off phase, not after the shingles are already down.
Answers About How the Work Is Done
Homeowners in Hyde Park and North Logan often ask about the process of stripping and inspecting before new roofing is installed.
Why does the crew strip the roof to the decking instead of overlaying?
Stripping exposes the decking so it can be inspected for rot, soft spots, or damage that would compromise the new roof, and allows damaged sections to be replaced before new underlayment and shingles are installed.
What happens if sections of the decking are rotted or soft?
Those sections are cut out and replaced with new plywood or OSB that matches the thickness and span of the original decking, so the new roof has a solid, uniform substrate.
How is flashing handled where the roof meets walls or chimneys?
Old flashing is removed during the tear-off, and new step flashing and counterflashing are installed to seal those transitions before the shingles are laid.
What does the estimate include after the site visit?
The estimate covers tear-off, decking inspection and replacement, underlayment, new shingles, flashing, and any ridge vents or drip edge needed to complete the system.
How long does the inspection take once the old roof is stripped?
Decking inspection happens as the old shingles come off, so damaged sections are identified and replaced the same day before the new underlayment is rolled out.
Siding Master brings thirty years of combined roofing experience and a 17-review Google profile to every roof replacement, with a family-run crew that strips to the deck and delivers a written estimate within the same week. Siding Master also
replaces roofs in Hyde Park, Preston, Logan, North Logan, and Fish Haven. Request a detailed estimate based on your current roof condition and decking needs.
